Walk-In Closet Progress – Closet Rods & Finished Ceiling (Plus, Two DIY Tips)

I’ll begin with the closet rods. I completely love how these matte gold rods look in opposition to the blue cupboards!

Putting in these rods was fairly easy. They got here with these mounting brackets which have these 5mm pins on the again, after which they’re held in place with a screw within the center. (Please excuse my gross arms. I at all times say that you need to by no means belief somebody who claims to be a DIYer and has clear arms and excellent fingernails. 😀 )

To put in these brackets with the pins, I marked the place I wished them to go inside the cupboards.

However right here’s my first tip. In the event you’re putting in a number of objects that each one must be put in on the identical top/distance, somewhat than utilizing your tape measure to mark and measure the position for each individually, minimize scrap items of wooden to make use of for this course of. I wished all of my brackets to be 8.5 inches from the again of the cupboards, and 1.75 inches from the brace for the shelf above it. So I minimize two items of scrap wooden. I minimize the primary to eight.5 inches, and used that to shortly mark the vertical line for my brackets…

After which I minimize one other piece of scrap wooden to 1.75 inches to shortly mark the gap from the shelf brace above it.

That method, I don’t need to rely on my accuracy in utilizing a measuring tape for every mark, which is nice, as a result of typically I make errors in my measurements. This can be a foolproof solution to get all the measurements precisely proper, and it goes a lot sooner.

And right here’s my second tip. When you should drill holes for one thing like these mounting brackets which have pins in them, and people holes must be in very exact locations, don’t attempt to measure and mark that spacing utilizing a tape measure. Simply use one thing like paint or lipstick on the backs of the pins and press that to the wall or cupboard the place you should drill the holes. For these, I used the darkest lipstick I’ve (and barely put on).

After which I lined up the highest pin to the purpose the place my two marks crossed, and lined up the underside pin on the vertical line, after which I knew precisely the place I wanted to drill the holes. No guesswork. No measuring with a tape measure and hoping that I received the measurements precisely proper.

Each match completely as a result of the marks got here immediately from the pins on the bracket.

So I very simply pushed that bracket into these completely spaced holes, after which I used to be capable of safe it with the screw that was supplied with the bracket.

I’m all about taking the guesswork out of processes that I have to repeat time and again and discovering methods to repeat these processes that don’t depend on me utilizing a tape measure to mark every particular person placement. And doing it this manner makes the method go a lot sooner.

So the excellent news is that that course of went very easily. I received the brackets put in for all 4 rods, and I received three of the 4 rods minimize and in place.

The dangerous information is that there was no such foolproof technique for reducing the bars. Each was a barely totally different measurement, so I needed to measure, mark, and minimize them individually. And on the final one, I managed to chop it one inch too quick. 😢

No downside. I can simply order a brand new one, proper? Incorrect. They’re out of inventory on the one I want. *Sigh* After all they’re. I’m so annoyed with myself for this. Measure twice, minimize as soon as, proper? I didn’t do this, and now I don’t fairly know what I’m going to do. I can’t discover a solution to contact the vendor on Amazon to see when or in the event that they’ll have extra, so I could need to probability it with one other model. I can’t consider I did that. I needed to minimize a complete of six rods for this closet, and I managed to do 5 of them excellent and tousled on the final one.

After I went to mattress final evening, the ceiling was nonetheless fully moist from the second coat of paint. However right here’s the way it appeared early this morning after the whole lot was dry.

I used a satin sheen on the cupboards and flat on the ceiling.

It’s truly type of exhausting to inform that the ceiling is blue except you’ll be able to see it subsequent to the white partitions.

However I’m actually pleased with how this turned out. Drywall is my least favourite factor to do, and I’m not nice at it. So after I needed to do repairs on the ceiling, I actually tried to take my time and never rush via that course of in order that I may get it as clean as potential. A professional may have carried out it a lot better than I did, however even at that, I actually don’t assume that anybody would discover the repaired areas.

I believe that appears fairly darn good! After all, utilizing flat paint helped. If you wish to disguise imperfections, flat paint is the way in which to go.

Right here’s a reminder of what the ceiling appeared like a few days in the past…

And right here it’s completed…

I ought to point out that it appears just like the room is somewhat darker now with the darker ceiling, however I don’t actually assume it’s. I had turned down the brightness on the lights as a result of it was hurting my eyes to work on the ceiling with the lights turned as much as full brightness. I forgot to show them again up all the way in which earlier than taking the photographs this morning. With them turned to full brightness, the room continues to be very vibrant.

In order that massive mission is completed! New lighting…examine. Repaired ceiling…examine. Primed and painted ceiling…examine. Closet rods put in…3/4 of a examine.

That’s a fairly ceiling, if I do say so myself. 😀