Back To The Porch Skirting – Two Options To Get The Look I Want

That plan for the aspect steps labored out, so now I do know that I’ll observe that very same plan for the steps to the bed room door in order that these two areas truly do match.

For these risers, I used retaining wall blocks. Clearly, I can’t merely stack retaining wall blocks to create the skirting for the entrance porch as a result of the entrance porch is definitely a concrete porch with a floating wooden porch constructed over it. Proper now, it appears to be like like a whole mess, however right here’s what I’m working with…

That’s the place I left issues once I stopped engaged on this venture when my unique thought (i.e., overlaying the skirting space with white PVC boards) didn’t work out. I had already painted the skirting space of the porch black as a result of I wished the black to indicate by the 1/4″ or 1/2″ areas between the PVC boards, after which once I realized my thought wouldn’t work, I began eradicating the black paint utilizing my handheld grinder. So once more, it’s a whole mess at this level.

However you may see that I don’t actually have loads of space to cowl. I feel the entire porch is about 21 ft vast, so the entrance space that must be coated is perhaps 15 ft vast and 13 inches excessive on the entrance, after which it’s going to should be carried across the aspect on the identical top, and that’s proper at 5 ft vast.

After which I’ve this annoyingly small space on the opposite aspect of the steps that may should be coated as nicely.

And I need it to appear to be the retaining wall blocks that I used on the aspect steps, which appear to be this. These are 4 inches excessive and just below 12 inches vast.

I did a fast mockup of how I need it to look, though I couldn’t get the colour good. However you may get the concept…

In order I’ve thought by this, I can give you two methods to attain this look. Neither of them shall be straightforward, so I’m already gearing up for the problem. I simply have to determine which solution to go. The primary means could be to make use of precise retaining wall blocks, use my handheld grinder to chop off the entrance portion of every block, after which adhere these to the concrete to create the facade.

It’s principally the identical idea as utilizing slices of reclaimed bricks to cowl a concrete sidewalk or porch, besides that slices of reclaimed bricks are commercially obtainable, whereas these slices of retaining wall blocks aren’t commercially obtainable so I’d must create my very own.

The second choice could be to make use of mortar combine to cowl the skirting space, after which use an precise retaining wall block to press into the moist mortar combine to create the feel and form that I need. I’ve shared the mortar combine thought in a earlier publish and confirmed how this YouTuber, Michael Builds, used mortar mix to create three different looks.

So mine would most likely be nearer to the thickness of the underside stone look besides that I’d create the scale and form of the retaining wall blocks as a substitute of stones, after which press the feel into the entrance of the moist mortar combine.

As I stated, neither of those choices goes to be straightforward, so I’ll have to begin with some trial and error. I’ll begin by seeing if I may even minimize even slices off of the entrance of the retaining wall blocks with my handheld grinder. Engaged on the aspect steps, I obtained fairly good at utilizing that grinder, however I’m unsure if my abilities are fairly that good but. And as soon as I check out that concept, I’ll have to find out if I’m keen to chop the quantity I have to cowl the entire skirting space. I haven’t figured what number of I would like but, however I already know it might be a messy and time-consuming job.

So these are the 2 concepts I’ve for attaining the look I need. However earlier than I soar headlong into this, I’d like to know you probably have every other concepts for attaining this look that I haven’t considered but. I’m open to strategies for how you can obtain this look, however at this level, I’m probably not open to going with a totally totally different look. I need the retaining wall block look. Remaining reply. However I’m open to every other concepts about how you can obtain this look should you can consider one which is perhaps simpler.